cNw E-Start Transfer Gear Bearing Failure

robs ss said:

Since it took @dobba99 s thread to drag out that a number of people actually had sprag failures, despite it apparently hadn't been previously mentioned, I thought I'd ask directly.

Has anybody experienced failure of these two smaller (ball?) bearings?

I intend to pull the sprag gear out and check/lubricate the sprag and the two roller bearings.
While I'm there, a bit of extra work would expose the two smaller bearings that carry the transfer gear shaft.

I'm not a fan of unneccecary work - like, I don't pull out my wheel bearings every so often to check them.

Cheers

Click to expand...

robs ss said:

Since it took @dobba99 s thread to drag out that a number of people actually had sprag failures, despite it apparently hadn't been previously mentioned, I thought I'd ask directly.

Has anybody experienced failure of these two smaller (ball?) bearings?

I intend to pull the sprag gear out and check/lubricate the sprag and the two roller bearings.
While I'm there, a bit of extra work would expose the two smaller bearings that carry the transfer gear shaft.

I'm not a fan of unneccecary work - like, I don't pull out my wheel bearings every so often to check them.

Cheers

Click to expand...