- Joined
- Jun 26, 2015
- Messages
- 63
I know that the clutch plates [friction and steel] are a Suzuki part # but does anyone know if the clutch inner and outer are Suzuki parts and if so part #'s ? Thanks.
I did a bit more than 21'000 miles, recognising the clutch noise as well but since long. Didn't think about clutch replacement yet...pingu-nz said:Evening all ,
What would be the expected mileage before the need to replace clutch plates?
I have a 2014 with the clutch basket already replaced after 3000 miles due to the rivets on the clutch basket failing,
Not sure if it was complete clutch basket and plates or just the basket .
cheers
Paul
Hi GKRyder
Not sure of extent of work done with clutch replacement after basket failed .
Clutch seems fine so far .
Just had the airbox and ecu upgrade done about 6 weeks ago .
Not running well with Aussie fuels
I have a Power Commander v coming , should be installed by end of next week to sort out fueling problems .
Installed and dyno $800 aus
Hope to get some miles on the norton
Will keep you posted on results ,
Cheers
Paul
Give them a poke again this week see what response you get .g'day Paul, thanks for the reply, i've emailed the Norton factory twice & got one reply saying they would contact the local distributor & no word from either & that was 12 days ago! i forwarded those emails to a new dealer in Melbourne & he replied saying they would look into the issue, that was 4 days ago.....