Clutch lever

Status
Not open for further replies.
Joined
Nov 10, 2012
Messages
3,154
Country flag
Hi.
My 750, with the first gears on, the clutch lever off only at the end.
The cable adjuster is all unscrew.
I wish he off a little before.
What should I do, unscrew half turn the clutch pushrod adjuster?.
Thank you.
Piero
 
pierodn said:
What should I do, unscrew half turn the clutch pushrod adjuster?.

What position do you have the adjuster set at?
The manuals say "one turn" however that is often too much, try unscrewing the adjuster by one third to half a turn.
 
L.A.B. said:
pierodn said:
What should I do, unscrew half turn the clutch pushrod adjuster?.

What position do you have the adjuster set at?
The manuals say "one turn" however that is often too much, try unscrewing the adjuster by one third to half a turn.
Hi Les,
nice to read you.
The adjuster is setted like per mannual, five discs like 850, thin plate at the end.
Thank you.
Piero
 
pierodn said:
L.A.B. said:
pierodn said:
What should I do, unscrew half turn the clutch pushrod adjuster?.

What position do you have the adjuster set at?
The manuals say "one turn" however that is often too much, try unscrewing the adjuster by one third to half a turn.
Hi Les,
nice to read you.
The adjuster is setted like per mannual, five discs like 850, thin plate at the end.
Thank you.
Piero
Piero,
Loosen clutch cable at handlebars to not influence the clutch arm in gear box. No tension on the cable 1/8" (3mm) slack.
Open inspection ccover at primary for clutch adjustment and loosen clutch adjuster nut.
Adjust the clutch adjuster and watch for diaphragm deflection.
Back off a 1/4 turn. Tighten nut.
Bring the clutch adjuster at the handlebars into tension while looking into inspection cover .. other side on the gear box.
Try that.
Cheers,
Thomas
CNN
 
Status
Not open for further replies.
Back
Top