Clutch Centres

Brooking 850

VIP MEMBER

Joined

Oct 3, 2011

Messages

1,612

• Jul 21, 2017

• #1

I have been doing an inet search for a friend and need to find a Norton hardened clutch centre without the splines (we need to machine a taper to suit a Triumph ) so in essence, a blank on the inside and hardened and clutch plate spline son the outside.
Any ideas ?
Regards Mike

 

L.A.B.

Moderator

VIP MEMBER

Joined

Nov 20, 2004

Messages

20,422

• Jul 21, 2017

• #2

https://www.rgmnorton.co.uk/buy/command ... 61d5f5fcfb

COMMANDO CLUTCH CENTRE MODIFIED FOR TRIUMPH MAINSHAFT

Click to expand...

https://www.rgmnorton.co.uk/buy/command ... 61d5f5fcfb

COMMANDO CLUTCH CENTRE WITH A SMALL PILOT BORE
NOT HARDENED.

Click to expand...

 

Brooking 850

VIP MEMBER

Joined

Oct 3, 2011

Messages

1,612

• Jul 21, 2017

• #3

Thanks Les , I did look at RGM a while ago and did miss the items.
Thansk and regards Mik

 

Fast Eddie

VIP MEMBER

Joined

Oct 4, 2013

Messages

21,594

• Jul 21, 2017

• #4

Alternatively, Triumph main shafts made with a Norton spline were available from Nourish and Tony Hayward. The Triumph taper is fine for a stock motor IF the tapers are a correct fit. But they are a weak point in hot motors.

 

Brooking 850

VIP MEMBER

Joined

Oct 3, 2011

Messages

1,612

• Jul 21, 2017

• #5

Thanks Nigel, it should be ok for his 500
Regards Mike
PS I will send you a extended outer heat shield for your 2 EX 1 S
Not sure of the cost as yet , not a lot
Regards Mike