Hi again everyone I am looking for some advice on the monobloc carbs that were originally running my bike when it was 650cc, the carbs are un-numbered so where should I measure to identify and also I have uprated the engine with a 750cc Morgo kit and what changes would be recommended to account for this it is running e3134 cams exhaust and inlet and boyer ignition advice gratefully received many thanks Chris
Carburation
- Thread starter chrisf1
- Start date
- Joined
- Feb 10, 2009
- Messages
- 2,975
Ask on the Triumph forum at http://www.britbike.com
Measure the diameter of the big hole where the carb bolts onto the manifold.
Look at the numbers stamped on the jets. Renew the needle jets.
Follow the well-publicised Amal tuning procedure. It's probably in your Triumph manual.
Measure the diameter of the big hole where the carb bolts onto the manifold.
Look at the numbers stamped on the jets. Renew the needle jets.
Follow the well-publicised Amal tuning procedure. It's probably in your Triumph manual.
