Cams and Pistons

Status
Not open for further replies.
Joined
Dec 5, 2003
Messages
287
Country flag
There are several choices available for cams for the 850 Commando, ranging from stock to Megacycle Race cams :shock: . Norvil also sells some in between grinds. I'm looking for a good strong street cam grind that will work with a single Mikuni, stock pistons and stock exhaust. Anyone have a recommendation? Also does anyone know if forged pistons are available for the 850?
 
Joined
Jun 1, 2003
Messages
2,134
Country flag
It sounds like you want a low to midrange RPM motor if you are going to run a single mik. I would probley stay with a stock cam and bump up the compression a little. if you are not going to rev it REAL hard the standard pistons would be fine.
 
Status
Not open for further replies.
Top