- Joined
- Oct 28, 2014
- Messages
- 1,869
Is there a Rickman expert in the house? working on an A65 Rickman off road and the oil line routing is peculiar. The feed is 3/8" while the return is much smaller. Even stranger is there are 2 return stubs welded high up on the frame by the filler cap. I am guessing one is a vent and the other is the actual return. It is my experience that the return line is NO SMALLER THAN THE FEED. Perhaps even bigger.
I am saying the feed is 3/8" because the Rickman feed tube at the bottom of the frame is 3/8". The manifold on the motor offers only two possibilities..3/8" and the much smaller size. There can be no mistake connecting the lines.
Please explain.
I am saying the feed is 3/8" because the Rickman feed tube at the bottom of the frame is 3/8". The manifold on the motor offers only two possibilities..3/8" and the much smaller size. There can be no mistake connecting the lines.
Please explain.