- Joined
- Sep 30, 2018
- Messages
- 20
Does anyone have experience of using a hone, such as Flex-Hone® , to clean up the bore on a Commando front brake master cylinder?
Any recommendations on abrasive type and grit?
Reason - corrosion from neglect has left some pitting in the cylinder bore and it seems to be leaking slightly. If it was external, a polish with 1000-grit wet 'n dry followed by Solvol would clean it up nicely.
Any recommendations on abrasive type and grit?
Reason - corrosion from neglect has left some pitting in the cylinder bore and it seems to be leaking slightly. If it was external, a polish with 1000-grit wet 'n dry followed by Solvol would clean it up nicely.