Atlas headlamp question

MikeG

VIP MEMBER
Joined
May 31, 2012
Messages
1,220
Country flag
The 63 Atlas I'm working on has the black headlamp shell with speedo in it. I have the lamp switch, but am missing the bezel and knob. The knob is available, but I can't seem to find the bezel.
Any leads?
 
All I can find in my parts list is the part number for the knob ..... 54330934.
There is also a 1 1/2 inch dia. washer, or disc, that fits inside the bezel. Part # = ? This could be eliminated if desired. Mine is painted black, and the chrome bezel forms a circular ring around the washer.

Most likely, the parts were originally supplied by Lucas. Good luck finding one.
 
Thanks-my BSA has a similar setup, which I can find, but the center hole looks too large. Could up possibly put up a picture or too of what I'm looking for?
Thanks
 
The parts in Bodger's link look right to me.

The seller says the parts are for Switch #34289, which is the switch in my parts list for Atlas.

Slick
 
Looks exactly like what I need!
Thank You

PS-found them at Classic British Spares. All my Google searches turned up nothing till I knew the Lucas switch type/number.
Thanks Again
 
Last edited:
Looks exactly like what I need!
Thank You

PS-found them at Classic British Spares. All my Google searches turned up nothing till I knew the Lucas switch type/number.
Thanks Again
If you are an authenticity anorak the original knobs had a slotted retaining screw, not a Phillip's or pozidrive like the "new" Lucas. Might lose points at a concours over that. LOL
 
Nothing concours about this at all. I was handed a half finished project and several boxes of parts and asked to make something rideable out of it.
 
Back
Top