Andover external oil filter kit with 3/8 barbed fluid fittings

Peter Restaino · Friday at 12:25 PM

I just tried mocking up the Andover external oil filter kit with 3/8 barbed fluid fittings on my under restoration 1970 Commando S but found the engine manifold barbed fittings are 1/2 inch so had to get another kit with 1/2 inch fittings. Just a heads up for the forum. What bikes used 3/8 is what I was wondering.

L.A.B. · Friday at 12:38 PM

Peter Restaino said:
Just a heads up for the forum. What bikes used 3/8 is what I was wondering.

All the standard fittings were 3/8".

Peter Restaino · Friday at 1:06 PM

I guess the early commandos are 1/2 thanks

L.A.B. · Friday at 1:21 PM

Central oil tank models.

Andover Norton Parts Drawings - Andover Norton Factory Parts - Commando Parts

Andover Norton Parts are the only Norton spare parts in the market manufactured to original drawings, within the factory-approved tolerances, from the correct materials, and with the correct finish.

andover-norton.co.uk

Peter Restaino · Saturday at 12:23 AM

yep its all 1/2 inch thanks

TRWham · Saturday at 4:54 AM

850 Mk 3 uses 3/8" for the wet lines and 1/2" for the breather

L.A.B. · Saturday at 5:05 AM

TRWham said:
850 Mk 3 uses 3/8" for the wet lines and 1/2" for the breather

The previous breather is also 1/2" but reduces before it reaches the oil tank unlike the Mk3. Nothing to do with the filter line of course.

marinatlas · Saturday at 5:27 AM

Andover Norton - ADAPTOR TUBE (06.4862) - 06.2617

ADAPTOR TUBE (06.4862)

andover-norton.co.uk

you need two of those , or find something similar !

Andover external oil filter kit with 3/8 barbed fluid fittings

Peter Restaino

L.A.B.

Moderator

Peter Restaino

L.A.B.

Moderator

Andover Norton Parts Drawings - Andover Norton Factory Parts - Commando Parts

Peter Restaino

TRWham

L.A.B.

Moderator

marinatlas

Andover Norton - ADAPTOR TUBE (06.4862) - 06.2617

Similar threads