Matt, the fuel tank has a in the tank fuel pump and filter that connects to the fixed steel line inside the tank. The line drops down to the bottom of the tank takes a 90 degree turn, follows the bottom for about 8 inches and another 90 degree turn exiting through the tank to a short outlet of about 8mm o.d.
In the fall of 08 I had a r/r failure, the 4th failure by the way, and as I was using the 907 for daily transport for work I fired up the old Norton and bevel drive for transport until this particular work load was completed. The Norton and bevel are receiving some much needed service now and I would like to ride the 907 to the vintage races in Birmingham this fall
and visit a good friend up in N. Carolina before he goes back to Fla.
Any help will be most appriciated.
jt