750 threads

Status
Not open for further replies.

Chris

VIP MEMBER
Joined
Jan 21, 2008
Messages
1,691
Country flag
Hi
Just had to swop engines in the race bike. In am aware that the head steady bolts are different. Am I correct in assuming the 750 are 5/16" BSF?
Also as I run a belt drive without the alternator. I just need a plain nut for the end of the crank.

Thanks Chris
 
Don;t know that top knot thread size nor form but do know its tricky to fine allen head bolts with the fine threads needed, so likely yes go get some. Be alert to bottoming out lenght.
 
Yes, 5/16-22 BSF for the 3 that go into the head.
 
Hi

Thanks for the replys. New bolts ready to go but going to clean the threads up with a tap first.
Just the crank thread to find :lol:

Chris
 
Status
Not open for further replies.
Back
Top