I'm thinking that thee clutch on my Atlas is getting close to needing an overhaul or replacement.
It's ridiculously easy to pull, and engagement occurs almost at the complete end of the lever travel; not smooth and somewhat abrupt. The 3 clutch basket springs are tightened to where the tops of their heads are flush with the clutch surface.
No amount of cable adjusting seems to change anything.
I have cleaned and reassembled the plates (can't remember how many of which plate), and it still didn't improve things much.
Do I just need to by new disks and plates? Again, don't know how long theses were on the bike.
Any other tips?
It's ridiculously easy to pull, and engagement occurs almost at the complete end of the lever travel; not smooth and somewhat abrupt. The 3 clutch basket springs are tightened to where the tops of their heads are flush with the clutch surface.
No amount of cable adjusting seems to change anything.
I have cleaned and reassembled the plates (can't remember how many of which plate), and it still didn't improve things much.
Do I just need to by new disks and plates? Again, don't know how long theses were on the bike.
Any other tips?