34mm Amals on Standard 850

gortnipper

Joined

Nov 11, 2013

Messages

5,411

• Jan 24, 2022

• #21

Brooking 850 said:

Anyone on the forum running 34mm twin Amal Mk2's on a standard 1973 850 and if so what would your needle clip, jetting and slide sizes be?
regards Mike

Click to expand...

Getting ready for a quick ride to Port Waikato?

 

Brooking 850

VIP MEMBER

Joined

Oct 3, 2011

Messages

1,618

• Jan 24, 2022

• #22

I had a chuffy RHS cylinder after the Brass Monkey so had to inspect, looks like a fresh motor awhile back hadn't bedded in properly so while apart thought I might give the 34's a try. No compression loss or leaky Vv's so that's all it looks like .

 

Brooking 850

VIP MEMBER

Joined

Oct 3, 2011

Messages

1,618

• Jan 24, 2022

• #23

Dave, you run 34"s on your bike don't you , I do realise its fairly hot though ?

 

gortnipper

Joined

Nov 11, 2013

Messages

5,411

• Jan 24, 2022

• #24

Brooking 850 said:

Dave, you run 34"s on your bike don't you , I do realise its fairly hot though ?

Click to expand...

932 Premiers, stock needles and slides. 310 (R, bottom clip) and 300 (L, middle clip) IIRC.

 

Last edited: Jan 24, 2022

gortnipper

Joined

Nov 11, 2013

Messages

5,411

• Jan 24, 2022

• #25

BP8ES

 

Brooking 850

VIP MEMBER

Joined

Oct 3, 2011

Messages

1,618

• Jan 24, 2022

• #26

Ok thanks