2023 961SP Rear Paddock Stand

Looks like Dynamoto has extended its accesories range. Should be something suitable for the SP and (lack of) bobbin situation, if interested in these top stands - or have purchased Fozzie’s bobbins (above).

Would be great if they could innovate further and design a method whereby the front wheel could rotate whilst on the stand - no idea how they’d do that. A smaller set of internal carriage wheels maybe.

Did anyone find any stands that can be used to remove the front and rear wheels safely on the non bobbin model 961.
Iv just put mine in the shed for the winter and the wheels are in need of a good polishing.
Some way of lifting the bike from the point a center would . Save some space in the shed would be good.

Chris955 said:

Did anyone find any stands that can be used to remove the front and rear wheels safely on the non bobbin model 961.
Iv just put mine in the shed for the winter and the wheels are in need of a good polishing.
Some way of lifting the bike from the point a center would . Save some space in the shed would be good.

Click to expand...

I bought an Oxford rear stand with L cups,can’t use it without removing exhausts as the top of the stand posts come into contact with the exhausts before the L cups contact the swingarm.Contacted Norton who were no help,they suggested contacting Judd racing who were no help either!
Can anyone on here help with suggestions?

Browny62 said:

I bought an Oxford rear stand with L cups,can’t use it without removing exhausts as the top of the stand posts come into contact with the exhausts before the L cups contact the swingarm.Contacted Norton who were no help,they suggested contacting Judd racing who were no help either!
Can anyone on here help with suggestions?

Click to expand...

If you were a full member you could post photos so we could see what you're talking about.
Other than that, I'm lost.
Cheers

robs ss said:

If you were a full member you could post photos so we could see what you're talking about.
Other than that, I'm lost.
Cheers

Click to expand...

Ok let’s ask a different question.What stands are forum members using to lift the rear end on the new 961’s to facilitate wheel removal or chain maintenance?

I am using a black widow brand. The L brackets on mine can be rotated down and locked so no contact with the muffler will be made. If you use the axle hole posts , you can still clean and adjust . Or put the bike on side stand and adjust chain this way.