OH Baby ! I Can hardly wait , it was fun before and now will be a real treat. !@TonyA having already adjusted fueling with the Dyno Jet - I think you're going to get a surprise when you see the difference this timing makes.
And more to this point , the OMEX bikes 2016 and earlier (not Euro 4) had the Tilt Circuit module to add these extra inputs. The 2016 and earlier OMEX has even less input pins than SC Delta !So, by way of an update.
I'm getting more used to the details in the Delta now, and am looking to explore extra sensors.
I had considered that having a map sensor may put me in a position to improve the tune of the bike. I reached out to SCS regarding their thoughts on what additional sensors may be a good way forwards for better tuning. Interestingly their response was that all the input sensor pinouts of the ECU are used by the bike in its current state. This may offer something by way of explanation as to why Norton went back to OMEX. If they needed a MAP sensor to assist with emissions (for Euro 4?), the additional sensor not being available to be added to the Delta could possibly lead them back to OMEX.
edit: I have been assured it wasn't that by someone who definitely knows.....
Having said that, I note that there appears to be some capability in the ECU to assign pinouts, so will review if removing the IAC has given me anything available.
A few quick thoughts; is the tachometer gauge display working in the sxTune software, and have you tried loading an alternat map?Hello,
One question with the Delta 400 my rev counter /tacho is not workig, with the oem ECU is working.
Any idea?
Kind Regards
Hello Panetone , Did you get a response from SCS Delta about the rev counter pulses ?The OEM is Typhoon, the settings are the same shown at Gojuu´s page.
The tacho/RPM counter is moving, but very slowly and shows wrong revs. It looks like overdamped.
With the typhoon ECU is everything working.
Yes, but it helps not.Hello Panetone , Did you get a response from SCS Delta about the rev counter pulses ?
what is the difference between 400s & 400 ecuAre the rev counts about half ? Does SCS Delta offer you a new ECU ? Do you have the Delta 400 S , or Delta 400 ? It shouldn't matter but just curious. The tacho pulses come from the ECU and based on cam sensor pulses hence the 2 pulses per rev. Maybe change the cam sensor or check diode or ask for a new ECU ?
Shorter in length.what is the difference between 400s & 400 ecu
They only make the 400S now .Shorter in length.