Norton Full Flow Oil Filter Kit 064283 Service Manual
Download the complete PDF version using the green download button at the top right of this page for the original Norton Villiers service manual covering the Full Flow Oil Filter Kit 064283. This factory conversion guide explains the parts supplied in the kit, the required engine plate drilling locations, the oil pipe routing and the final installation of the cartridge-type full flow oil filter on 1971 and 1972 Norton Commando models.
The manual states that the kit was designed to convert earlier Commandos to the later full flow oil filter arrangement, which became standard from engine number 208754. The opening page includes an illustrated kit contents diagram with the return pipes, oil pipe clips, protection springs, mounting head, tab washer, fixing screws, filter element, retainer strip and screw clip clearly identified.
The installation pages cover draining the oil tank, removing the existing return pipe, connecting the shorter filter hoses, drilling the two mounting holes in the right-hand rear engine plate and securing the filter head in position. A drilling diagram provides the required location measurements, while the final page shows the oil filter mounted on the motorcycle and explains pipe routing around the gearbox and Isolastic area. The maintenance section also gives the recommended oil filter replacement intervals and renewal method.
Contents Include
- Norton Full Flow Oil Filter Kit 064283 overview
- Conversion reference for 1971 and 1972 Commando models
- Factory note that the filter became standard from engine number 208754
- Illustrated kit contents and part identification
- Return pipes, mounting head, filter, retainer strip and screw clip details
- Engine plate drilling points and dimensioned mounting diagram
- Oil filter head installation and tightening guidance
- Oil return pipe routing around gearbox and Isolastic areas
- Finished oil filter mounting position illustration
- Oil filter maintenance and replacement interval information
