Wish there was something like the suggested company here in the States.
Found them - base on the Magura normally closed switch
Does the kit come with a bird nesting tool? Is that tool available anywhere?A few years ago I bought a Venhill kit (toolbox) so that I can make my own.
Very good quality with teflon liners, etc. Makes both sizes of cable (eg: throttle/choke and clutch/brake).
I highly recommend them!
Cheers
If you do go down this path, for safety's sake, make sure you "birds nest" the larger cables.
Does the kit come with a bird nesting tool? Is that tool available anywhere?
No - but I'm not sure you need one. All you have to do is splay the wires out (small long-nosed pliers) once the nipple is on then pour in the solder (I used 60% tin/ 40% lead - stronger than electrical stuff). Once cool cut off and file/grind the pieces sticking out of the solder.Does the kit come with a bird nesting tool? Is that tool available anywhere?