New posts

Reply to thread

Message

I am definitely spoiled for space, but still manage to make a mess of it!

Ripped up the drawer sides on the Raimann line rip, the big German saw in the earlier photo,. then used this powerfed General with the same dado set up as before for the slotting

[ATTACH=full]53175[/ATTACH]

Drawer parts ready for assembly. They snap together like Lego, the glue ensures that they can take a beating over the years.

[ATTACH=full]53176[/ATTACH]

Drawers all done, just need to make some pulls. I found a piece of al. Extrusion in my scrap metal bin, it can be cut up for the pulls, should work fine.

[ATTACH=full]53177[/ATTACH]

The best part is filling my new drawers. This phrase may have a different meaning in years to come, but for now it means getting all the Vincent 1360 parts out ofboxes piled on the workbench and organized in the top drawers. The rest of the drawers will swallow up construction /woodworking tools and material.

[ATTACH=full]53178[/ATTACH]

<blockquote data-quote="worntorn" data-source="post: 225148" data-attributes="member: 590">I am definitely spoiled for space, but still manage to make a mess of it!Ripped up the drawer sides on the&nbsp; Raimann line rip, the big German saw in the earlier photo,. then used this powerfed General with the same dado set up as before for the slotting&nbsp;[ATTACH=full]53175[/ATTACH]Drawer parts ready for assembly. They snap together like Lego, the glue ensures that they can take a beating over the years.[ATTACH=full]53176[/ATTACH]Drawers all done, just need to make some pulls. I found a piece of al. Extrusion in my scrap metal bin, it can be cut up for the pulls, should work fine.[ATTACH=full]53177[/ATTACH]The best part is filling my new drawers. This phrase may have a different meaning in years to come, but for now it means getting all the Vincent 1360 parts out ofboxes piled on the workbench and organized in the top drawers. The rest of the drawers will swallow up construction /woodworking tools and material.[ATTACH=full]53178[/ATTACH]</blockquote>

[QUOTE="worntorn, post: 225148, member: 590"] I am definitely spoiled for space, but still manage to make a mess of it! Ripped up the drawer sides on the Raimann line rip, the big German saw in the earlier photo,. then used this powerfed General with the same dado set up as before for the slotting [ATTACH=full]53175[/ATTACH] Drawer parts ready for assembly. They snap together like Lego, the glue ensures that they can take a beating over the years. [ATTACH=full]53176[/ATTACH] Drawers all done, just need to make some pulls. I found a piece of al. Extrusion in my scrap metal bin, it can be cut up for the pulls, should work fine. [ATTACH=full]53177[/ATTACH] The best part is filling my new drawers. This phrase may have a different meaning in years to come, but for now it means getting all the Vincent 1360 parts out ofboxes piled on the workbench and organized in the top drawers. The rest of the drawers will swallow up construction /woodworking tools and material. [ATTACH=full]53178[/ATTACH] [/QUOTE]