Who has fitted the center stand to an N15? I have issues clearing the lower gearbox bolt.

My stand is fouling the two nuts on the ends of the lower gearbox stud. It is the right length stud and I can see by this photo I grabbed off a BringATrailer site that my stuff's oriented right. But mine won't clear, no way I can see to fix it. Looks tight in this photo, mine follows 2nd pic.

I removed washers I had on there (still on in the 2nd pic), that helped a little but it's still not able to pass those nut/stud ends and therefore won't retract.

Any help appreciated, this just seems wrong.

Yeesh, I think it has to do with the frame being pulled together too tight by the footpeg through bolt. I have to figure out the spacers on both. It's really tricky with no diagram.