Reply to thread

I think I might have found the answer to why the instructions say: "Squeeze the centre portion to 2 flats of the nut..." in section C34, 12, which says to: "Fit the......nut and tab washer*... (late models) in the case of the tab washer engaging the ends, in the 2 holes in the clutch centre."

So it looks like the tab washer could have been redesigned from having two locating legs 180 degrees apart and two centre tabs to a tab washer with one locating leg and a third tab washer after the manual instructions had been written.


*(also the hardened flat washer)


Back
Top