Viton valve guide seals

Status
Not open for further replies.
Those seals look identical to hi end kit Kenny Dreer once sold. Only need two per engine.
 
It sure sucks when you can buy 8 seals like that for $20.00 when 2 with our part # will cost close to that price and be just formed rubber without the spring and the pretty blue.

I think I used to use datsun 2000 seals on my bike in the 70's and they fit perfectly. They are probably harder to find now than Norton seals though. Anyone know of other switchable seals commonly available at your local auto pts counter?
 
RennieK said:
It sure sucks when you can buy 8 seals like that for $20.00 when 2 with our part # will cost close to that price and be just formed rubber without the spring and the pretty blue.

I think I used to use datsun 2000 seals on my bike in the 70's and they fit perfectly. They are probably harder to find now than Norton seals though. Anyone know of other switchable seals commonly available at your local auto pts counter?
Click to expand...



Toyota valve seals also will work---they have the spring as well---I had some guides cut for fit years ago---the guides need to be turned down a bit and a groove cut so the seals will be a good fit. Not that big a deal. Just get the toyota guide and that will be used to cut the Norton guides the same. The Toyota seals were Viton also as I recall.
 
Status
Not open for further replies.

Similar threads

Paul O' Norton
valve guide size
Replies
4
Views
336
Paul O' Norton
Paul O' Norton
DanT
Oil dripping between exaust valve guide and head.
Replies
12
Views
650
DanT
DanT
Britstuff
  • Locked
Exhaust Valve Guide Seal Question
2 3
Replies
54
Views
6,026
Tornado
Tornado
Sergio
Valve/guide seizure
2
Replies
31
Views
6,119
Blewdy Yaink
Blewdy Yaink
SEd27
  • Locked
Oversize Valve Guide Dilemma
2
Replies
21
Views
3,358
SEd27
SEd27
Back
Top