Reply to thread

Upholstery was done on 1/12, exactly as specified by the client - Black lower, white piping, gray top, rolled stitch . Nice padding for two, without the typical Dunstall "hump" for the fender clearance, resulting in almost full-thickness foam at the top.



Marked rear fender for trimming, just below the frame clamp.



Installed a temporary gas tank & seat to test ride it on 1/17. Took a few kicks and it sputtered a bit, but ran great and idled (a tad high) after a couple of minutes of setting the mixture. Pulls like a freight train!



Back
Top