Tail Piece for 961

cuz · Monday at 9:05 PM

Hi all,
While giving the 961 a wash the other day I had the left blinker fall off into my hand with the tinkle of plastic pieces hitting the driveway.

On inspection the tail piece has cracked and fractured, right hand side was not far behind.

Does anyone have a spare tail/number plate piece for sale?

Or where I might be able to purchase an after market one?

Either CF or moulded plastic, at this stage beggars can't be choosers.

I have sent emails to several companies but have not received any positive responses.

I can see by previous post this is not uncommon with the 961s.

Any help would be much appreciated.

Cheers,
Cuz

Stephen_Spencer · Monday at 9:49 PM

Try searching these out Cuz, ya never know. Or new from Norton, via Judd Racing.

cuz · 2026-09-29T00:07:03-0600

Hi Stephen, thanks for the suggestions.
I followed up those and have sent messages, here's hoping.
This will prevent any rides until I find a solution.
Cheers Mark

MAK · 2026-09-29T06:20:27-0600

cuz said:
Hi all,
While giving the 961 a wash the other day I had the left blinker fall off into my hand with the tinkle of plastic pieces hitting the driveway.

On inspection the tail piece has cracked and fractured, right hand side was not far behind.

Does anyone have a spare tail/number plate piece for sale?

Or where I might be able to purchase an after market one?

Either CF or moulded plastic, at this stage beggars can't be choosers.

I have sent emails to several companies but have not received any positive responses.

I can see by previous post this is not uncommon with the 961s.

Any help would be much appreciated.

Cheers,
Cuz

Plastic will fail again..Carbon fibre solves the problem..time to ring Norton. Not cheap.

TonyA · 2026-09-29T06:45:49-0600

MAK said:
Plastic will fail again..Carbon fibre solves the problem..time to ring Norton. Not cheap.

I hope Norton will supply it.

cuz · 2026-09-29T15:18:23-0600

MAK said:
Plastic will fail again..Carbon fibre solves the problem..time to ring Norton. Not cheap.

I should have specified that I have a 2015 Commando and was under the impression that TVS Norton wont deal Stuart Garners legacy.
Am I wrong?

Browny62 · 2026-09-30T03:52:41-0600

TonyA said:
I hope Norton will supply it.

Norton only supply through the dealerships,not direct to the customer.

TonyA · 2026-09-30T06:27:26-0600

cuz said:
I should have specified that I have a 2015 Commando and was under the impression that TVS Norton wont deal Stuart Garners legacy.
Am I wrong?

If you work with Judd Customer Support , you should be able to get an order placed . They will send you over to parts . I worked with Aiden French and got my order placed. What I meant earlier about Norton supplying was just that. I hope they will supply/order the part for you (meaning Norton must supply it to Judd). I am still waiting for my order , as usual nothing is in stock and must be ordered.

Tail Piece for 961

Similar threads