swapping lights electrical question

Status
Not open for further replies.
P

pelican

Joined
May 2, 2009
Messages
1,390
How do I go from the normal headlamp- hi, low, pilot, ground
swapping lights electrical question


to halogen? 3 black wires
swapping lights electrical question


I'm assuming the pilot light remains unconnected, hook up the low, and maybe the high to the other 2, there's nowhere for the ground?
 
lol...it's the kit from rocky point cycles. I'm guessing route the hi, low into a 2 to 3 connector and solder the ground to the shell?
 
One of the 3 tabs on the halogen is common to both hi and low, that goes to ground. I think it's the center one but I'm not positive.
 
maylar said:
One of the 3 tabs on the halogen is common to both hi and low, that goes to ground. I think it's the center one but I'm not positive.
Click to expand...

Find the EARTH it should be fairly clear if you look at the back of the bulb, then connect the other 2 to the wires from your harness, it may be connected the wrong way round , if it is just swap the 2 connections.
 
Status
Not open for further replies.
Back
Top