Superblend: Fag vs. Zeus

P

pierodn

Joined

Nov 10, 2012

Messages

3,154

• Oct 17, 2019

• #1

Hi All.
Fag is a NU306E XLM1C3, Zeus is a NU306EMC3.
Same size and weight.
Zeus has the internal that comes out both side, Fag one side only.
I would use Zeus.
Do yiu know thus Zeus brand?.
Thank you.
Piero

 

kommando

Joined

May 7, 2005

Messages

7,610

• Oct 17, 2019

• #2

Zeus are Chinese and founded in 2010.

Now what was the question ?

 

L.A.B.

Moderator

VIP MEMBER

Joined

Nov 20, 2004

Messages

21,090

• Oct 17, 2019

• #3

pierodn said:

Zeus has the internal that comes out both side, Fag one side only.

Click to expand...

The FAG bearing should therefore be NJ306E.

NU is not the correct bearing.

 

Time Warp

.......back to the 70's.

Joined

Dec 3, 2012

Messages

3,727

• Oct 17, 2019

• #4

pierodn said:

Zeus has the internal that comes out both side, Fag one side only.
I would use Zeus.

Click to expand...

If you used them as a pair the crankshaft would be able to move 0.019" each way axially (plus any existing end float) compared to the correct shouldered bearing and the crankshaft cheek would rub on the outer.
The Indian bearings are as good as anything unless you found new old stock originals.

 

P

pierodn

Joined

Nov 10, 2012

Messages

3,154

• Oct 17, 2019

• #5

L.A.B. said:

The FAG bearing should therefore be NJ306E.

NU is not the correct bearing.

Click to expand...

Sorry Les,
NJ.
Piero

 

P

pierodn

Joined

Nov 10, 2012

Messages

3,154

• Oct 17, 2019

• #6

H

Time Warp said:

found

Click to expand...

Hi
I understand.
I will use Zeus for skateboard.
Thank you.
Piero

 

Last edited: Oct 17, 2019

Torontonian

Joined

Dec 28, 2009

Messages

5,550

• Oct 18, 2019

• #7

The J is so important. Journal.