Onder
VIP MEMBER
- Joined
- May 11, 2010
- Messages
- 4,120
Looking for a DS ball bearing for T150v. Plenty of RHP 1 1/8 C3 on offer.
But:
Is it CN or C3 clearance? It seems factory was CN not C3.
And is RHP "England" actually so? I read that they are owned by NSK which
makes good bearings. I'm fine with any bearing maker provided it is not sourced
in the third world...or China. Japan would be fine. USA same.
Any help on this?
But:
Is it CN or C3 clearance? It seems factory was CN not C3.
And is RHP "England" actually so? I read that they are owned by NSK which
makes good bearings. I'm fine with any bearing maker provided it is not sourced
in the third world...or China. Japan would be fine. USA same.
Any help on this?
