Reply to thread

Cut that wrong hoop off the frame at the last point it is the correct angle. (ignore the red lines and arrows, that is to explain where the frame bends in a front end collision)

 Buy the hoop FE has the link and cut it back at the front to match the bit left on the frame.

Find two short lengths of tube that fit inside the tube of the hoop and have these partially inserted and welded into the hoop ends on the frame and then get the new hoop welded onto the frame over the ends of the tubes inside the frame hoop.

Then get these support pieces welded on the inside of the hoop for extra support.

[URL unfurl="true"]https://andover-norton.co.uk/en/shop-details-2/20497[/URL]

and these on the outside

[URL unfurl="true"]https://andover-norton.co.uk/en/shop-details-2/20464[/URL]