Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I cut 2 C15 swing arms so the 4 cuts when the halves were swapped gave 1" longer arms on one swingarm plus some bits which could be used to make a short one, but are in the scrap bin. Into the longer arm joints I inserted some short sections of tube with OD matching ID or the swingarm tubes and left 1/4" gaps for a welder to fill and joint the halves up. Dressed the weld and ended up with an extended C15 swingarm.