- Joined
- Apr 7, 2004
- Messages
- 1,691
Boyer module bracket for mounting on BSA twins that use the welded to the frame battery bracket.
This is a stainless bracket made for easy mounting underneath the battery strap bracket found on BSA’s from 1963 – 1968. You have to drill and tap the holes (use 8-32 screws), apply the Velcro and tie-wraps, and wire up the Boyer module.
This bracket saves you a lot of work designing and building a good location for the Boyer module. It provides a location safe from the weather, easily accessible, and easy to wire. Well tested on a number of my bikes, it allows room for the battery box pin to come through the rubber grommet cup in the bracket on the frame. The stock side cover arrangement clears this mounting location. The wires go back towards the oil tank and can easily reach the required locations for the Boyer box.
This is a stainless bracket made for easy mounting underneath the battery strap bracket found on BSA’s from 1963 – 1968. You have to drill and tap the holes (use 8-32 screws), apply the Velcro and tie-wraps, and wire up the Boyer module.
This bracket saves you a lot of work designing and building a good location for the Boyer module. It provides a location safe from the weather, easily accessible, and easy to wire. Well tested on a number of my bikes, it allows room for the battery box pin to come through the rubber grommet cup in the bracket on the frame. The stock side cover arrangement clears this mounting location. The wires go back towards the oil tank and can easily reach the required locations for the Boyer box.
