P11 mudguard stay to mudguard hardware

012565 Mudguard stay-to-mudguard bolts (8) G15CS, N15CS, G15CSR, P11
000039 Mudguard stay/mudguard bolt washers- small (8) G15CS, N15CS, G15CSR, P11
024236 Mudguard stay /mudguard bolt washers - large (8) G15CS, N15CS, G15CSR, P11
000190 Mudguard stay-to-mudguard bolt spring washers (8) G15CS, N15CS, G15CSR, P11
000080 Mudguard stay-to-mudguard bolt nuts (8) G15CS, N15CS, G15CSR, P11


Anyone have a picture of what the stack of all this original hardware looks like on the bike? It's from page 22 of the parts list.

My bike only has a bolt and a square nut, no washers, which is why I suspect one side has vibrated loose and disappeared.

Need to replace.
Preferably with old original hardware to match the rest of the bike.
Also looking for old aluminum front or rear fenders. Dents OK.

I did some research on these 8 small (2BA) front fender mount nuts/bolts/washers.
I chose to use 3/16 stainless with nylock nuts with fiber and rubber washers as well.

Here is my document on file, my research -