P11 high pipe long spacers dims or part numbers

Joined
Oct 19, 2020
Messages
10
Country flag
Hi all, this is my first post after lurking for a while.

Does anyone have or could point me to part numbers or the dimensions (ID,OD & length) for the long spacers used mounting the high pipe exhaust/silencers?

I've searched on all the part lists and come up with blank.

Thanks

 
What Norton part number do you have for this spacer?

SilencerStayboltSpacerDim.jpg


Dont know why aluminum
IIRC they were supplied to me in steel.
 
Hi all, this is my first post after lurking for a while.

Does anyone have or could point me to part numbers or the dimensions (ID,OD & length) for the long spacers used mounting the high pipe exhaust/silencers?

I've searched on all the part lists and come up with blank.

Thanks


Hi I do not know the part number but if you contact Mike Psartridge at Waldridge he is having a batch made up at the moment. If you want some you could order, if not I am sure he will be happy to give you the part number. Pete
 
Hi I do not know the part number but if you contact Mike Psartridge at Waldridge he is having a batch made up at the moment. If you want some you could order, if not I am sure he will be happy to give you the part number. Pete
Hi Pete, thanks. Do you have Mike’s email address?
 
With the variation in Hi-Pipe bends, if you are making your own, I would check the length needed with the pipes mounted and adjust accordingly. If I recall on mine, I needed to make it a little longer than standard to avoid unnecessary stress. If you are purchasing from a vendor, you may need to add washers or a spacer or trim the length.
 
Back
Top