Norton / Matchless Serial # Help

Joined
Mar 24, 2022
Messages
12
Country flag
So I pulled out my dad's old bike from where it's laid for 30/40 years.

He's always claimed it was a "1962 commando" aside from that seemingly not existing, I've had a hard time deciphering the serial # on the engine. Looks to be a1964 Atlas 750 Engine in a Matchless Frame. Can anyone help verify this for me? I've been searching for like 2 hours and can't get a 100% confirmation

Below the Barrel:
G15CS/N108738

On the crankcase (by your right foot)
MA4300G

What doesn't help is the guy my dad got this from painted the frame so I have no idea where to find serial #s on the frame
 
Well your right. There is definitely no 1962 Commando. They started in 1968.

What you have is one of the AMC hybrids. Which is a pretty confusing area for most of us, including me. But there are some real experts about who should answer.

Looking in the P11 and other Norton motorcycle forum where you have already posted will help too.

 
Last edited:
Well your right. There is definitely no 1962 Commando. They started in 1968.

What you have is one of the AMC hybrids. Which is a pretty confusing area for most of us, including me. But there are some real experts about who should answer.

Looking in the P11 and other Norton motorcycle forum where you have already posted will help too.

Appreciate the reply!
 
So I pulled out my dad's old bike from where it's laid for 30/40 years.

He's always claimed it was a "1962 commando" aside from that seemingly not existing, I've had a hard time deciphering the serial # on the engine. Looks to be a1964 Atlas 750 Engine in a Matchless Frame. Can anyone help verify this for me? I've been searching for like 2 hours and can't get a 100% confirmation

Below the Barrel:
G15CS/N108738

On the crankcase (by your right foot)
MA4300G

What doesn't help is the guy my dad got this from painted the frame so I have no idea where to find serial #s on the frame

What you've got is a 1964 Matchless G15CS Sports Scrambler, one of the early true desert sleds. Production started at S/N 107388, so yours would have been assembled late in the year of 1963.
It would be interesting to know if your bike has the primary chaincase support stud, which was a design update as it was missing in the first batches of bikes. Fitment is highly recommended if it's missing.

MA4300G is the gearbox serial number. These bikes (and the Commando) have separate transmissions. Your bike has the improved 1962 type gearbox ("A") and the performance clutch.

You may read the story of these bikes as authored by Paul Morin of the HYCAM group here:


I hope you decide to restore the bike!

- Knut
 
Well, this will not help you. The location for post-60 models applies to Matchless' "own" models. The hybrids (i.e., the Matchless framed bikes with Norton twin engines) had the VIN number at the opposite side, numbers are vertical. Please remove paint carefully as the stamping may be faint.

What you've got is a 1964 Matchless G15CS Sports Scrambler, one of the early true desert sleds. Production started at S/N 107388, so yours would have been assembled late in the year of 1963.
It would be interesting to know if your bike has the primary chaincase support stud, which was a design update as it was missing in the first batches of bikes. Fitment is highly recommended if it's missing.

MA4300G is the gearbox serial number. These bikes (and the Commando) had separate transmissions. Your bike has the improved 1962 type gearbox ("A") and the performance clutch.

You may read the story of these bikes as authored by Paul Morin of the HYCAM group here:


I hope you decide to restore the bike!

- Knut
Appreciate the reply!

I'm already falling in love with the history behind this bike....In stereotypical father/son fashion, we'll be restoring it together.

I imagine I'll be coming here quite frequently as I'm kind of taking the next step in terms of my restoration experience. I've only restored / rebuilt 80s and 90s dirtbikes so I'm probably in for it with this one.

Cheers!
 
Good luck with that! Parts backup is generally good. Prices for s/h parts have skyrocketed in the last few years.
Premier source for new engine/transmission parts is Andover Norton.
There are lots of performance upgrades available, your wallet is the limiting factor.
I suggest you obtain a spares parts book which may be downloaded here:


Secondly, I suggest you invest in a book covering restauration of british bikes. Don't get trapped by trying to attack all at once. Start with the engine, then trans, do the chassis in a final step.
If your bike is reasonably complete, take photos and label non-obvious parts as you go along. This will help when you're ready to assemble. Be careful about bolts and spacers.
Missing sheet metal should be sourced now, as donor bikes are getting rarer year by year.

Good luck!

- Knut
 
Yeah we have high hopes right now (praying i didnt just jinx it)...Engine has good compression and valves move freely. Body is also in great shape including the oil tank, gas tank, other storange tank, fenders, etc. Obviously will have to get into it to really know whats up but we were pretty shocked with the first few hours we poked around.

Our first step right now is getting the service manual, leaving everything as is and see if we can get a spark - no dice when we tried with the current setup but the wiring was hacked to bits.
 
Yeah we have high hopes right now (praying i didnt just jinx it)...Engine has good compression and valves move freely. Body is also in great shape including the oil tank, gas tank, other storange tank, fenders, etc. Obviously will have to get into it to really know whats up but we were pretty shocked with the first few hours we poked around.

Our first step right now is getting the service manual, leaving everything as is and see if we can get a spark - no dice when we tried with the current setup but the wiring was hacked to bits.
Being a race bike, this bike has magneto ignition, so harness is of no importance. Bike has been laid up for 30-40 years and you are expecting the magneto to produce a spark? Are you really contemplating on getting the engine started? That's a gross mistake. Before doing more harm than good, I suggest you stop and listen to the advice from people here.

You will find a workshop manual at the site I linked to. It's for 1966 onwards models but basically applicable.

- Knut
 
Appreciate the reply!

I'm already falling in love with the history behind this bike....In stereotypical father/son fashion, we'll be restoring it together.

I imagine I'll be coming here quite frequently as I'm kind of taking the next step in terms of my restoration experience. I've only restored / rebuilt 80s and 90s dirtbikes so I'm probably in for it with this one.

Cheers!
Good for you both. Good way to bond over an old bike and memories.
 
Knut,
Expectations of a magneto sitting for decades….I gave this one on my ‘56 AJS model 30 a spin and it did spark…..surprised. Dated 4/57 and not original to this road machine.
Norton / Matchless Serial # Help
 
Hello Oscar. How are you and your father doing on your G15 project? I just ran across your thread and I realize this thread is over a year old, but I thought I would add what I can. I have an according to my title a 1965 G15 CS and its number is pretty close to what yours is 108986, I've owned this bike for around 30 years I gave $1200 for it in 1992. It sounds pretty rasty with those straight pipes, it has a nice sound to it.🙂

Mark
 
I actually just posted yesterday about this on a new thread

I have the engine completely torn down and ready to pull the trigger on ordering the parts for the engine rebuild, but want to make sure I'm not blowing too much money before placing the order. Trying to get a very rough figure of the values of these bikes before proceeding.

My dad got this bike when he was 18 and has been holding onto it for 50 years now! It's got a lot of sentimental value to us so we don't care if we're a little upside down, but don't want to throw 5-6k at it if it's worth 2k or something ya know.
 
If the bike has sentimental value to you, I suggest you make it a runner and enjoy it for many years, not taking expenditure vs. value into account.
However, if you are thinking of selling it fairly soon & expecting a decent pay-back on a restoration - forget it. A restoration is for enthusiasts only.

Complete project bikes may fetch around $2.500, while a showcase may fetch $15.000.

Auction results at Bring-A-Trailer will give you a clue of prices to expect. Please note Matchless bikes are underrated in the US - Norton bikes will fetch higher prices.
Look up the bike repository with Baxter Cycle in Iowa as well (asking prices reflect they are a dealer).

- Knut
 
Back
Top