Hello, actually I did not have an answer because I got the bike to a local mechanic that put the bike running again. But I am back on writing cause the bike stoped again:
The problem started with the batteries getting empty too fast. I had the bike at a local mechanic who figured out that electricity was getting at the batteries at 15V, so he replaced some electrical part to fix that, but the bike stoped working after a few runs. After a few kilometers the engine would start to fail, and the rpm tachometer going lose, and lacking power until I had to get to 2nd gear to get back home.
Than I could connect to a "specialist", a mechanic that works with wankel engines at Mazda, and does work at home with airplane and boat wankel engines. He took a look at the bike and said it is an electrical problem and would not try to fix it. He showed me that while the engine is running, both exhausts are outputting correctly, and he took off one of the spark plugs and said the compression is ok.
Currently, the bike starts with auxiliary help to the batteries, otherwise they get empty in little time. After few seconds the rpm tachometer goes lose and it reads top rpm although the engine acceleration is idle and after that it looks like the power is cut and the engine stops.
Any ideas/solutions on how to get the bike back on running?
Thanks,
Gonçalo
