Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Yes, I checked it from multiple positions as well as the middle and ends for any taper. I was just curious how people use the plastigauge without new bearings on hand. It wouldn’t make sense to do it with used bearings.After reading some more it makes more sense to me now. That’s what the regrind specs are for. Thanks!There’s an engine shop near my work. I’m going to stop by and see if they can verify my measurements for me. I don’t think it’ll need any work, but i do have the workshop manual handy for the radius specs
Yes, I checked it from multiple positions as well as the middle and ends for any taper. I was just curious how people use the plastigauge without new bearings on hand. It wouldn’t make sense to do it with used bearings.
After reading some more it makes more sense to me now. That’s what the regrind specs are for. Thanks!
There’s an engine shop near my work. I’m going to stop by and see if they can verify my measurements for me. I don’t think it’ll need any work, but i do have the workshop manual handy for the radius specs
