Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I will take a reading if you really need it.Good luck finding a used one. If you intend to complete your build in the near future, I recommend you buy a repro, or repair the one you have, which is a small repair really.Walridge used to stock 03-2256. The old inventory list I looked at this morning showed no stock, please verify. Norvil list it too, but I don't know how faithful his part is made.Repros tend to be of the older type, 03-1530. What are the hole sizes at your fender tabs at the loop?PS. 02-9763 is the loop made for the late G80CS and which is readily available to me. It has a 10 degree angle between loop C/L and the flat bar extension C/L. 03-1530/03-2256 may be identical in this regard.- Knut
I will take a reading if you really need it.
Good luck finding a used one. If you intend to complete your build in the near future, I recommend you buy a repro, or repair the one you have, which is a small repair really.
Walridge used to stock 03-2256. The old inventory list I looked at this morning showed no stock, please verify. Norvil list it too, but I don't know how faithful his part is made.
Repros tend to be of the older type, 03-1530. What are the hole sizes at your fender tabs at the loop?
PS. 02-9763 is the loop made for the late G80CS and which is readily available to me. It has a 10 degree angle between loop C/L and the flat bar extension C/L. 03-1530/03-2256 may be identical in this regard.
- Knut
