New posts

Reply to thread

Message

I bought these digital instruments, they're quite small in stainless cases and mean I wont need to run a speedo cable to the front wheel.. they even give peak revs and speed when needed.. should be interesting :mrgreen:

[ATTACH=full]49963[/ATTACH]

They came with stainless mounting plates, which didnt quite work with the billet yokes, so I copied them in alloy instead, then drilled and tapped the underside of the yokes to mount them. While the yokes were out, I also drilled them for fork stops which we made in stainless. I had to guess where to place the fork stops, as the frame has no tabs. It works ok, but the fork stops currently fit the frame tubes which I need to do something about.

[ATTACH=full]49964[/ATTACH]

[ATTACH=full]49965[/ATTACH]

[ATTACH=full]49966[/ATTACH]

I then decided the clocks were too far out from the yokes, so I changed the mounts, it means there is no room for the idiot lights now, but I'll find a new home for them somewhere else..

[ATTACH=full]49967[/ATTACH]

[ATTACH=full]49968[/ATTACH]

<blockquote data-quote="Bevelheadmhr" data-source="post: 201979" data-attributes="member: 5032">I bought these digital instruments, they&#039;re quite small in stainless cases and mean I wont need to run a speedo cable to the front wheel.. they even give peak revs and speed when needed.. should be interesting :mrgreen: [ATTACH=full]49963[/ATTACH]They came with stainless mounting plates, which didnt quite work with the billet yokes, so I copied them in alloy instead, then drilled and tapped the underside of the yokes to mount them. While the yokes were out, I also drilled them for fork stops which we made in stainless. I had to guess where to place the fork stops, as the frame has no tabs. It works ok, but the fork stops currently fit the frame tubes which I need to do something about. [ATTACH=full]49964[/ATTACH][ATTACH=full]49965[/ATTACH][ATTACH=full]49966[/ATTACH]I then decided the clocks were too far out from the yokes, so I changed the mounts, it means there is no room for the idiot lights now, but I&#039;ll find a new home for them somewhere else..[ATTACH=full]49967[/ATTACH][ATTACH=full]49968[/ATTACH]</blockquote>

[QUOTE="Bevelheadmhr, post: 201979, member: 5032"] I bought these digital instruments, they're quite small in stainless cases and mean I wont need to run a speedo cable to the front wheel.. they even give peak revs and speed when needed.. should be interesting :mrgreen: [ATTACH=full]49963[/ATTACH] They came with stainless mounting plates, which didnt quite work with the billet yokes, so I copied them in alloy instead, then drilled and tapped the underside of the yokes to mount them. While the yokes were out, I also drilled them for fork stops which we made in stainless. I had to guess where to place the fork stops, as the frame has no tabs. It works ok, but the fork stops currently fit the frame tubes which I need to do something about. [ATTACH=full]49964[/ATTACH] [ATTACH=full]49965[/ATTACH] [ATTACH=full]49966[/ATTACH] I then decided the clocks were too far out from the yokes, so I changed the mounts, it means there is no room for the idiot lights now, but I'll find a new home for them somewhere else.. [ATTACH=full]49967[/ATTACH] [ATTACH=full]49968[/ATTACH] [/QUOTE]