Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Look at any old fashioned printed circuit board. About 5mm between solder and components. So they withstand heat fairly well. Best practice is to bend a diode wire back forming a small U and cut off the end. Then tie the wire in the U. Then solder together. It should look like: diode body - 5/16" free wire - solder - wire where tin has not crept in the wire. When done, push shrimp tube back and heat.More words on a simple task.
Look at any old fashioned printed circuit board. About 5mm between solder and components. So they withstand heat fairly well. Best practice is to bend a diode wire back forming a small U and cut off the end. Then tie the wire in the U. Then solder together. It should look like: diode body - 5/16" free wire - solder - wire where tin has not crept in the wire. When done, push shrimp tube back and heat.
More words on a simple task.
