Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I soaked the felt seal in oil for 5 minutes, then compressed it with my high pressure quick grip clamp (272kg of force) between two pieces of wood. I left it for about 30 minutes.I removed the seal from the clamp and very quickly got it in before it started to expand. I nipped it in the middle to make it into a kind of plus shape first of all, and then fed it in all round.When it was pretty much all in, I took a socket from my socket set that has a slightly smaller diameter than the clutch shaft, and used the socket to keep the seal in place while I worked in one little bit that wasn’t quite in.I’ll take another picture with the seal on the shaft tomorrow. It seems to fit fine.
I soaked the felt seal in oil for 5 minutes, then compressed it with my high pressure quick grip clamp (272kg of force) between two pieces of wood. I left it for about 30 minutes.
I removed the seal from the clamp and very quickly got it in before it started to expand. I nipped it in the middle to make it into a kind of plus shape first of all, and then fed it in all round.
When it was pretty much all in, I took a socket from my socket set that has a slightly smaller diameter than the clutch shaft, and used the socket to keep the seal in place while I worked in one little bit that wasn’t quite in.
I’ll take another picture with the seal on the shaft tomorrow. It seems to fit fine.
