Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Thanks, I will search for the part numbers if this spacer I made doesn't work. Unless you possibly know them? Parts list not super clear on this. Nut should be simple to find generically, 7/16" x 26 TPI half width I think.I measured every bolt and thought I had them all correct. This one is likely stock, given the wear marks line up perfectly. With only about 10K on the bike from new I don't imagine it was changed. But who knows.I tried making a spring compressor out of PVC as I saw done on a YouTube video about a Matchless with the same stand, no dice. In the end I put on some heavy gloves and wrangled it in. Now I may get to do it again.
Thanks, I will search for the part numbers if this spacer I made doesn't work. Unless you possibly know them? Parts list not super clear on this. Nut should be simple to find generically, 7/16" x 26 TPI half width I think.
I measured every bolt and thought I had them all correct. This one is likely stock, given the wear marks line up perfectly. With only about 10K on the bike from new I don't imagine it was changed. But who knows.
I tried making a spring compressor out of PVC as I saw done on a YouTube video about a Matchless with the same stand, no dice. In the end I put on some heavy gloves and wrangled it in. Now I may get to do it again.
