Reply to thread

Well I thought the story was over, but oh no there is a final twist. I swapped the tyre over today, then went to bolt the discs on, but could not get the new Torx bolts to start. I knew the thread is the correct pitch so thought the spacer which is behind the discs was not aligned. I looked carefully and what did I see? the holes in the hub do not align with the holes in the discs. The holes in this 2015 hub are 2.5mm closer together than the Talon hub ( which has the correct 80mm PCD). I've checked on the EBC website and they list the same disc (with colour / wave variants) for all bikes.


Seriously you could not make this up.


I'm really starting to realize what TVS was up against when they inherited the old stock.


[ATTACH=full]103737[/ATTACH]


Back
Top