Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Bill, I am back in California and making good progress on my bike, I wanted to ask a couple of questions:What does the front lower hole in the toolbox inner shell mount to? I have found that there is a hole in the top and one at the back that mounts to corresponding points on the frame, but it looks like the lower hole must mount to a bracket that would in turn be bolted somewhere on the frame.The inner primary cover has three holes in close proximity to each other, one is for mounting the case to the engine/gearbox plate, the other is for the alternator wires to exit the case and the 3rd I cannot see a function, although I am inclined to seal this up to prevent primary oil going everywhere.Thank you.
Bill, I am back in California and making good progress on my bike, I wanted to ask a couple of questions:
What does the front lower hole in the toolbox inner shell mount to? I have found that there is a hole in the top and one at the back that mounts to corresponding points on the frame, but it looks like the lower hole must mount to a bracket that would in turn be bolted somewhere on the frame.
The inner primary cover has three holes in close proximity to each other, one is for mounting the case to the engine/gearbox plate, the other is for the alternator wires to exit the case and the 3rd I cannot see a function, although I am inclined to seal this up to prevent primary oil going everywhere.
Thank you.
