fitting 2X VM32 Mikuni Carbs on an 850 MKII

Hi,

Does any one please have specs/ Mikuni part numbers for all the

correct jets numbers,needles and slides etc complete! required for fitting 2X VM32 Mikuni Carbs for basic operation on a Norton commando 850 MKII.
I do know that the carbs can be bought and are available pre-jeted, but that is not my question.

Thanks,

Brewer.

I can't help with the jetting, but I looked at this possibility myself and found out that you must fit splayed inlet manifolds because the mikunis have a wide float bowl and the standard Norton manifolds ( or inlet stubs) are too close together.

Just thought you might need to know that.

Some VM 36 info: http://www.postdiluvian.org/~mason/moto/jetting.html