APRRSV
VIP MEMBER
- Joined
- Jun 26, 2016
- Messages
- 590
I am going to build a bike with a solid mounted forward leaning Commando engine in a wideline featherbed frame. I have the Andover Norton wideline featherbed frame and their matching swingarm. I also have motor mount plates for a forward leaning Commando engine from Norvil.
So now I have a few questions for those of you who may have built something similar or anyone else for that matter.
Regarding front forks, I would like to use Roadholders but I am unsure of what yoke offset and stanchion length would be recommended/required for the wideline frame.
Regarding rear shocks, what length is recommended/required?
What rim sizes, front and rear are recommended for this setup? (I intend to use a Madass TLS front brake).
Thanks in advance for any advice you may have and I'm sure I'll have many more questions in future.
Ed
So now I have a few questions for those of you who may have built something similar or anyone else for that matter.
Regarding front forks, I would like to use Roadholders but I am unsure of what yoke offset and stanchion length would be recommended/required for the wideline frame.
Regarding rear shocks, what length is recommended/required?
What rim sizes, front and rear are recommended for this setup? (I intend to use a Madass TLS front brake).
Thanks in advance for any advice you may have and I'm sure I'll have many more questions in future.
Ed