Electric Connectors
- Thread starter Yorkie
- Start date
- Status
Conrad
VIP MEMBER
- Joined
- Jun 3, 2020
- Messages
- 57
I bought mine from Steadfast but I believe these are sold elsewhere. There are cheap versions available but I found that the metal broke easily (like the originals). 
Lucas Copy Single & Double Female Connector Set 850641 900288 Bullet UK Made
Lucas Copy Single & Double Female Connector Set 850641 900288 Bullet UK Made
steadfastcycles.com
marshg246
VIP MEMBER
- Joined
- Jul 12, 2015
- Messages
- 5,758
The ones from here are quality: http://www.britishwiring.com/category-s/267.htm
Be sure to get the right size. They're all the same OD but the wire size matters. Their C314 is correct for standard Norton wires (14 strand/approx. 18ga)
If you're asking about what the bullets plug into, they sell them as well: http://www.britishwiring.com/category-s/266.htm
Be sure to get the right size. They're all the same OD but the wire size matters. Their C314 is correct for standard Norton wires (14 strand/approx. 18ga)
If you're asking about what the bullets plug into, they sell them as well: http://www.britishwiring.com/category-s/266.htm
- Joined
- Jun 25, 2004
- Messages
- 929
I found a supplier on EBay in the UK - great prices and economical shipping.
High Quality 4.7mm Lucas Triumph Norton Land Rover Style Brass Bullet Connectors | eBay
Find many great new & used options and get the best deals for High Quality 4.7mm Lucas Triumph Norton Land Rover Style Brass Bullet Connectors at the best online prices at eBay! Free shipping for many products!
www.ebay.ca
- Joined
- Aug 19, 2021
- Messages
- 1,466
I buy standard US crimp-on .180 bullet connectors for 16/14 ga wire. I remove the plastic sleeve by clamping the plastic barrel in a vice and heating the bullet end. A slight twist and you have naked bullet connectors. I use a good set of crimping pliers and cover the junction of the wire/connector with heat shrink. I slightly spread the bullet end for a snug fit in the Female British connectors.
- Status
