drive chain adjusters

Good Afternoon,
I am starting to resurrect a '63 Atlas in time for this summer's INOA rally and I think it will happen! As best I can tell, the adjusters screw into a threaded boss adjacent to the slots for the axle, right? Well, has anyone here experienced having to remove broken adjusters? One side is flush (hard to tell it is even there) and the other a bit of recess. Before I remove the swingarm and take it to a machine shop, I wanted to make sure what I am seeing is accurate.
TIA.
Kevin

If the threaded holes are forward of the slots for the rear axle or spindle as commonly used other side of the pond, probably so. A picture would help me, because I don't own an Atlas. However, there are plenty of Atlas owners on this site that would know the correct answer.

Personally I am of the opinion that making that repair would be very possible. I've not done it though.

Andover Norton sells the adjusters. Eurotrash Jambalaya here in the USA sells the adjusters in stainless.

Schwany said:

Thanks. I have new adjuster screws (still in the Andover package!) to install and it was while I was on the floor looking, I noticed the problem. Fingers crossed that this is minor.

Click to expand...

Thanks