Crazy things you see on the internet

Status
Not open for further replies.
baz said:
Take a look at this exhaust mount
The bloke has youth on his side and I hope he learns and grows
But jeez it's enough to make me cry looking at it !!!
Click to expand...

Cringing from the start. I couldn't even get to the Norton part.
 
grandpaul said:
Cringing from the start. I couldn't even get to the Norton part.
Click to expand...
Yeah, it was painful for a well seasoned brain. While doing a lot of skipping ahead I think I actually said when are you going to shut the fu-ck up and get to the point out loud.
 
It is easy to criticise ignorance. Most experienced motorcyclists have a different mindset and values to the norm. However, most of the guys who access this forum seem to be very switched-on, even the beginners. What some idiots do to motorcycles is criminal. I have seen a motorcycle which became a letter-box at a farmer's gate.
 
What's wrong with that Al, lots of artistic letter boxes around and more so in the country, if an old bike is gone past it's used by date, turn it into something useful.
 
  • Like
Reactions: baz
baz said:
Oh I skipped through it
It's around halfway to three quarters through where he welds a boss straight on to the fish tail silencers
And the bolts them rigidly to the commando Z plates
Click to expand...
Used to see this all the time at the shop. Cracked pipes and had to explain why you can't solid mount pipes on a Norton. The hard part was the fact that most of them didn't get it!
 
  • Like
Reactions: baz
Big_Jim59 said:
Used to see this all the time at the shop. Cracked pipes and had to explain why you can't solid mount pipes on a Norton. The hard part was the fact that most of them didn't get it!
Click to expand...
Only Commandos have rubber mounted exhaust, what about all the non isolastic Norton models that were hard mounted, I have seen more Commando header pipes cracked as well wore out the screw in flanges threads, my 850 in the Featherbed frame has had solid mount exhaust for over 42 years now and not one crack, each exhaust has only one mounting bolt on the rear muffler and the screw in flange at the motor, I still have the original threads in the flange, I don't even have locking devices for the flange as they never come lose.
So really they did get it.

Ashley
Crazy things you see on the internet
 
Commando mufflers could probably have hard mounts if a flexible pipe was integrated in the headers. It would have to be close to the exhaust nut, in order to minimize movements at the muffler end of the headers. Many cars have an arrangement like this, because their engines are rubber/visco-elastically mounted, but their exhaust header is out of sight. On a naked bike, it's not an appealing view.
www.totalflowusa.com

TOTALFLOW TF-N50200N Heavy Duty Double Braided Universal Notched Ends Exhaust Flex Pipe Connector | 2 Inch ID

2 inch flexpipe exhaust flex pipe connector Notched, Flex Pipe, Flex Pipe Exhaust, 2 Inch Flex Pipe, 2 Inch Flexible Exhaust Pipe, Muffler Flex Pipe, Stainless Steel Flex Pipe, Exhaust Flexi, Exhaust Flex Pipe, Exhaust Flexible Pipe, Universal Flex Pipe, Flex Pipe Price, Exhaust Flex Connector...
www.totalflowusa.com www.totalflowusa.com

- Knut
 
ashman said:
Only Commandos have rubber mounted exhaust, what about all the non isolastic Norton models that were hard mounted, I have seen more Commando header pipes cracked as well wore out the screw in flanges threads, my 850 in the Featherbed frame has had solid mount exhaust for over 42 years now and not one crack, each exhaust has only one mounting bolt on the rear muffler and the screw in flange at the motor, I still have the original threads in the flange, I don't even have locking devices for the flange as they never come lose.
So really they did get it.

Ashley
View attachment 112501
Click to expand...
I think the point is he has fixed ex mounts in an isolastic mount engine
 
Big_Jim59 said:
Used to see this all the time at the shop. Cracked pipes and had to explain why you can't solid mount pipes on a Norton. The hard part was the fact that most of them didn't get it!
Click to expand...
I was commenting on can't solid mount pipes on a Norton as I do know Commandos are all rubber mounted and have seen many headers on Commando with cracked headers, mine cracked after 3 years from new around where the balance pipe fits.
 
If you haven't tried a dumb thing on a motorcyle you are building, then either you are lying, or haven't built many bikes. And if you haven't done something that costs you time and money, same applies. Lighten up.
 
That's an interesting bike rack, one or other of my lighter bikes would probably fit well. Is it home made? I wonder what the weight carrying capacity might be and about the owners experiences of using it.
TIA, Steve
 
Stevo said:
That's an interesting bike rack, one or other of my lighter bikes would probably fit well. Is it home made? I wonder what the weight carrying capacity might be and about the owners experiences of using it.
TIA, Steve
Click to expand...
I have one of those $100 HF ones, and carried my ZRX1200 on it with no worries. 485 pounds. Loading it up there was the hard part, getting it off was not quite as dodgy.
 
Status
Not open for further replies.

Similar threads

glb
Tracking the location of Nortons on the internet
Replies
18
Views
3,558
MxMartin
MxMartin
K
  • Locked
On the road (almost) at last!
Replies
13
Views
1,715
acotrel
acotrel
Back
Top