Clutch interlock

Banditman · May 1, 2019

Hey, does anyone know if the clutch interlock does anything more than stop the bike from starting? I have a 2015 961SF and am putting Brembo RCS master cylinders on and they dont have any provision for the clutch interlock. I know on some bikes the ECU will limit timing or other things if it thinks the clutch is pulled in, didnt know if I was going to see anything like that with the Norton. Easy enough to bypass the interlock just hoping it wont bite me if I do. If I can't bypass it full time I'm not sure what I'll do.

Thanks

richard-7 · May 1, 2019

Banditman said:
Hey, does anyone know if the clutch interlock does anything more than stop the bike from starting? I have a 2015 961SF and am putting Brembo RCS master cylinders on and they dont have any provision for the clutch interlock. I know on some bikes the ECU will limit timing or other things if it thinks the clutch is pulled in, didnt know if I was going to see anything like that with the Norton. Easy enough to bypass the interlock just hoping it wont bite me if I do. If I can't bypass it full time I'm not sure what I'll do.

Thanks

If it helps, i broke mine (interlock) (neutral safety) with a tie down strap and jumped it until I got a new one a week later. Seemed to work okay. No issues.

Banditman · May 5, 2019

Thanks Richard. Well I went for it and after putting a few hundred miles on yesterday I dont feel any difference so I think it's fine. I'm very happy with the improvement in feeling I'm getting with the Brembo rcs masters, highly recommended.

Clutch interlock

Banditman

richard-7

Banditman

Similar threads