I have two brand new 38 mm Gardner carbs that I was going to use on the NRE 750 engine that I will (probably) never receive from the current "manufacturer" - Mr Chris Bushell at Nourish Engineering.
I am therefore building a Norton 750 short stroke with a Fullauto 850 head with inlet ports of 34,5 mm diameter.
Now, I am of course wondering if the 38 mm Gardners would work ? As well as if I was to fit a set of 35 mm units.
Any and all experience and advice is welcomed!!
I am therefore building a Norton 750 short stroke with a Fullauto 850 head with inlet ports of 34,5 mm diameter.
Now, I am of course wondering if the 38 mm Gardners would work ? As well as if I was to fit a set of 35 mm units.
Any and all experience and advice is welcomed!!