htown16
VIP MEMBER
- Joined
- Apr 29, 2009
- Messages
- 1,484
Just ran across this article and thought it did a pretty good job explaining how carbs work.
http://home.everestkc.net/malsin/Motorc ... ry_101.htm
Even though its generic its pretty much applicable to Amals. Couple of notes on an Amal ,the pilot screw controls airflow and the slide number references cut away in 1/16 of and inch, ie a #3 is 3/16 of an inch.
Hope this helps some one. It took me a while to figure this out.
http://home.everestkc.net/malsin/Motorc ... ry_101.htm
Even though its generic its pretty much applicable to Amals. Couple of notes on an Amal ,the pilot screw controls airflow and the slide number references cut away in 1/16 of and inch, ie a #3 is 3/16 of an inch.
Hope this helps some one. It took me a while to figure this out.